2024 Land Cruiser Tail Light Overlays
These overlays let you knock out some of the red in the large tail light housings. Installation is simple and the results speak for themselves. See our gallery of photos.
We provide a variety of materials you can get these in. Start a theme for your vehicle and mix it with our other vinyl products.
AVAILABLE MATERIALS
- Dark Smoke - Standard dark smoke material. Made in Germany.
- Dark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Made in the USA.
- Light Smoke - Standard dark smoke material. Made in Germany.
- Dark Smoke Stealth - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Made in the USA.
- Dark Smoke Honeycomb - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Modified light pattern when lit. Made in the USA.
- Dark Smoke Carbon Fiber - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Modified light pattern when lit. Made in the USA.
- Dark Smoke Galaxy - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). A galaxy full of metallic flake in the light. Appears similar to standard dark smoke when backlit. Made in the USA.
Instructions
Install in 70+ degree weather.
Items you may want to have:
- Detail Spray (without wax) or glass cleaner
- Microfiber Towel
- StickerFab Application Fluid or dish with soapy water (few drops of dish soap + 1-2 cups of water)
- Felt Lined Squeegee
Clean the application area to prepare it for installation. Do not use a spray with any type of wax in it.
A wet installation is recommended. Use slightly soapy water on the back of the vinyl or our StickerFab Application Fluid. This will allow you to move the vinyl around and find the correct alignment. Once aligned, use your fingers or a felt tip squeegee to push out the water/air. Allow the vinyl to dry.