Bigfoot aka Sasquatch in the Woods Tail Light Overlays
These overlays are surprisingly cool! Just check out the photos. You can see the Bigfoot and silhouette of the trees.
In our installation video we show you how these overlays look on the vehicle, with and without the lights on.
We provide a variety of materials you can get these in. Start a theme for your vehicle and mix it with our other vinyl products.
AVAILABLE MATERIALS
- Dark Smoke - Standard dark smoke material. Made in Germany.
- Dark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Made in the USA.
- Light Smoke - Standard dark smoke material. Made in Germany.
- Dark Smoke Stealth - Premium dark smoke MATTE material with air egress channels for ease of installation (helps prevents bubbles). Made in the USA.
- Dark Smoke Honeycomb - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Modified light pattern when lit. Made in the USA.
- Dark Smoke Carbon Fiber - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Modified light pattern when lit. Made in the USA.
- Dark Smoke Galaxy - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). A galaxy full of metallic flake in the light. Appears similar to standard dark smoke when backlit. Made in the USA.
New Ideas?
Pleasecontact usfor other design inquiries. If your design has some mass appeal, we will get it listed!
Instructions
Items you may want to have:
- Detail Spray (without wax) or glass cleaner
- Microfiber Towel or Paper Towel
- StickerFab Application Fluid or dish with soapy water (drop of dish soap + 1-2 cups of water)
- Felt Lined Squeegee (optional)
- Heat gun or hair dryer
Clean the application area to prepare it for installation. Do not use a spray with any type of wax in it.
You can tell which side is which by the angled design on the bottom of the overlays. Recommended installation temperature is 75-85 degrees. Unless it is colder, keep your work area in the shade.
A wet installation is recommended. Use slightly soapy water on the back of the vinyl. This will allow you to move the vinyl around and find the correct alignment. Once aligned, use your fingers or a felt tip squeegee to push out the water/air. Allow the vinyl to dry.