Roll Bar Protection - 4 Door
Those roll bars need protection against accidental damage. Whether you have a soft top or hard top, accidents happen and paint gets damaged.
This is a 4 piece kit that is made out of rubber. It has 3M pre-applied to the back and it covers a large portion of your roll bars. Each side is labeled left or right on the back.
INSTALLATION
Clean the application area to prepare it for installation.
NOTES: We recommend that the installation area be free of wax and not under direct sunlight. Some will choose to clean the application with rubbing alcohol which is okay.
"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."
- Microfiber
- Detailing Spray without Wax
Test fit the panels and when you are happy with the alignment start peeling back the 3M protector. Remove enough of the strip to place the panel back down and peel it out from underneath. Peel all the pieces off and press firmly.
Best Temperature to Install: 70-80 Degrees Fahrenheit