If you treat your Bronco a little rough and hate looking at scratches in your soft plastic, you might want to give this item a whirl. We picked 3D carbon because it is one of our thicker materials. It does add some texture to a plain-ish trim piece as well.
The material is not cheap and sourced from a US company. Do not wax. Use 303 Aerospace Protectant and watch it shine. Actually use that just about everywhere inside your Bronco and some places on the exterior.
Notice of Non-Affiliation and Disclaimer:
StickerFab is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Ford Motor Company, or any of its subsidiaries or its affiliates.
The name Ford as well as related names, marks, emblems and images are registered trademarks of their respective owners, including Ford Motor Company.
INSTALLATION
Clean the application area and apply the vinyl using a dry install. Make sure the area is clean and free of dust, debris, dirt, Armor All, etc. 75-85 degree weather is preferred.
Some will choose to clean the application area with rubbing alcohol which is okay.
"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."
The material has air egress channels to prevent ugly bubbles and the adhesive is pressure and heat activated so feel free to keep a hair dryer around. You don't need tons of heat. If it burns you, it may be too hot.
If you treat your Bronco a little rough and hate looking at scratches in your soft plastic, you might want to give this item a whirl. We picked 3D carbon because it is one of our thicker materials. It does add some texture to a plain-ish trim piece as well.
The material is not cheap and sourced from a US company. Do not wax. Use 303 Aerospace Protectant and watch it shine. Actually use that just about everywhere inside your Bronco and some places on the exterior.
Notice of Non-Affiliation and Disclaimer:
StickerFab is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Ford Motor Company, or any of its subsidiaries or its affiliates.
The name Ford as well as related names, marks, emblems and images are registered trademarks of their respective owners, including Ford Motor Company.
INSTALLATION
Clean the application area and apply the vinyl using a dry install. Make sure the area is clean and free of dust, debris, dirt, Armor All, etc. 75-85 degree weather is preferred.
Some will choose to clean the application area with rubbing alcohol which is okay.
"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."
The material has air egress channels to prevent ugly bubbles and the adhesive is pressure and heat activated so feel free to keep a hair dryer around. You don't need tons of heat. If it burns you, it may be too hot.
